Page 1 of 1

750 carb o rings

Posted: 18 Jul 2018, 20:23
by David Richard
Hi I have my 750 d1 carbs apart as they were leaking between 3 and 4 ,does anyone know all of the o ring sizes to replace the 2 straight ones and the tee piece inlet and the over flow at the top ,any help, I can see now the build up of crud over the o rings but they don't look perished ,thanks david

Re: 750 carb o rings

Posted: 19 Jul 2018, 11:42
by Freddy
David Richard wrote:Hi I have my 750 d1 carbs apart as they were leaking between 3 and 4 ,does anyone know all of the o ring sizes to replace the 2 straight ones and the tee piece inlet and the over flow at the top ,any help, I can see now the build up of crud over the o rings but they don't look perished ,thanks david
I have a quite large generic full set of 0-rings and its surprising how few actually match what I'm looking for. Easy to match the diameter, its the thickness that varies and is hard to match from the set. For that reason I think you are going to have to pull them out and take a sample to an engineering supply shop. The 0-rings alone aren't even available as OEM parts, but rather are part of the pipe and o-ring as a complete 'assembly'.

Re: 750 carb o rings

Posted: 19 Jul 2018, 15:58
by David Richard
hi thanks for the info I will have a look,david