zr550 exhaust

For all your mechanical queries, or for sharing your mechanical know-how. Also used for arguing about which oil to use...

zr550 exhaust

Postby TREVOR9 » 16 Dec 2018, 14:47

Will any other exhaust fit? Gpz550 or any other Kawasaki 4 - 1.
TREVOR9
 
Posts: 25
Joined: 24 Oct 2017, 18:03

Re: zr550 exhaust

Postby Freddy » 18 Dec 2018, 05:10

What's wrong with the current one? If it is completely shot beyond recovery I'd shoot for a 2nd hand genuine one. There are a number of them on Ebay.

You know the genuine one will work without a problem. You can't be sure of that if you put one on from a different model, even if it bolts up ok. The intake, cam timing, and exhaust was designed by the Kawasaki engineers to work as a unit. Change any one of the 3 components and you could potentially introduce a performance degradation, usually a flat spot somewhere in the rev range. Not say it will do this, but just that it might.

That's why I suggest to play it safe and get a second hand 550 one, even if it cost a couple dollars more.
Freddy
 
Posts: 385
Joined: 06 Sep 2017, 12:06
Location: Sydney Australia

Re: zr550 exhaust

Postby kinkyfreestyler » 01 Jan 2019, 16:07

you can also look at gpz/gpx600 , z550/650 ,gt550 also some of the 750 pipes like harris etc.....fit its alla bout the rear mount the head pipes off the 750 are tad longer ,but the diametre is the same !
kinkyfreestyler
 
Posts: 13
Joined: 04 Sep 2017, 19:52

Re: zr550 exhaust

Postby Corey » 07 Jan 2019, 05:55

In Japan, the GPz400 and ZX400 have the same port spacing as the GPz/KZ/ZR550.
.
.
.
1985 GPz550 Daily Commuter (loads of fun stuff)
2003 SV650s Racebike #44
User avatar
Corey
 
Posts: 20
Joined: 14 Jan 2018, 14:11
Location: San Lorenzo, CA


Return to Mechanical

Who is online

Users browsing this forum: No registered users and 1 guest

cron