Hi all, having removed the fuel tank and put it on again , the gauge no longer works for some reason, there is a cable connector under the tank with 2 wires which I assume is for the gauge, but there is no voltage to the wire in the connector, assuming that there should be, as it works all the time that the battery is connected normally.
Any advice would be great
Al
1100 fuel guage
Re: 1100 fuel guage
I would measure the resistance of the fuel gauge first, could be it's open (no resistance) in which case there will be no current flowing thru the fuel level dial.
Re: 1100 fuel guage
OK, I'll try that and see what happens, thanks
Re: 1100 fuel guage
All the checks seemed ok, so I put the tank back on and worked
Re: 1100 fuel guage
Frustrating but glad it's operational again