Jammed in gear. Back to the dealers RESOLVED
Posted: 15 Jul 2018, 08:18
Been really busy on the Zephyr 1100 this week. Made and fitted the exhaust baffles, replaced the road horn with the twin originals, Replaced the non standard handlebars with original ones along with the bar end weights and grips. All looking good until yesterday. Went for a ride the exhaust mod was sounding good the carb adjustment I did fixed the lumpy ticker over so very pleased indeed. Stopped at a junction pulled away and couldn't get the bike out of first gear. Pulled over and had a look no visible problem just stuck in first tried rocking the bike back and forth flipped the gear change up and down all to no avail. So today it's load the bike on the trailer and a 200 mile round trip back to the dealer in Exeter.
Anyone have any idea as to what the problem could be?? I've had no problem until now not jumping out of gear no missing gears only thing I noticed was it clonks quite load when changing from first to second and second to third. I had looked at a couple of videos of Zephyr rides and could hear in the background the bikes changing gear and could hear the same sound as mine so presumed this was just normal.
What are your thoughts anything I should point out to the dealer??
Thanks
Ross
Anyone have any idea as to what the problem could be?? I've had no problem until now not jumping out of gear no missing gears only thing I noticed was it clonks quite load when changing from first to second and second to third. I had looked at a couple of videos of Zephyr rides and could hear in the background the bikes changing gear and could hear the same sound as mine so presumed this was just normal.
What are your thoughts anything I should point out to the dealer??
Thanks
Ross