The Zephyr Zone

Track day done, first day was ok, second was raining , so we pack our bikes and left home.
I finally received pilotjets and plan is install them tomorrow. Let's see.

Couple of non related pics,
I meant to go test ride today with carbon edit, but weather was against me, and I got stuck with my track bike. Little fine tuning with yamaha's yms software. Nice when you can do all with computer.
Tomorrow I will take zephyr for a ride.

Ok, so I was wrong about pilot jet size. 30 was way too big. Idle is now 10.5 afr and if I turn fuel screw fully close it won't rise upper. Just of idle cruising is now 12 afr and 1/2 throttle about 14, wot is 10.
So, I need new pilot's, needles and mains. It's more than possible that jets what I ordered, is wrong size, but I figured that it's better to order them all at the same time, because of shipping time and costs.

So now there is coming 20 pilot's,(one size bigger than stock) richest needles and 130 mains ( smaller than stock 135).
Bike runs good though, but if my afr gauge is showing about right measurements, then it's no way near where it supposed to be.

My mikuni supplier has failed me and can't deliver jets.
D'oh, fortunately it's ritch side so i can ride with it.
Meanwhile I made some fork protector's. There was always insects and other derbies, so fork seals was in danger to damaged.